Home - Prodotti - Bitumen sheets and asphalt road

Bitumen sheets and asphalt road

Guaine bituminose e asfalti stradali

Mixtures

HDT

This granule comes from the selection of both post and pre-consumer caps and it is made up of HDPE with just a few PP residues. Two formulas with different PP % (5-8% and 2-4%) can be obtained through differentiated sieving systems. It is filtered to 1000 microns and its melt index is between 2 and 3 at 190° - 2,16 kg. It is suitable for the production of HDPE articles where a good mechanical resistance at low temperatures is required, as well as elasticity and a good finishing outward appearance with shiny and homogeneous dark tonalities.

Code:
003GR047
MFI:
2 - 3 (2,16 kg - 190°)
Granule:
HDPE
Production:
Injection
LD

This granule comes from post-consumer and it has a higher content in LDPE (96-97%) and only a residual part of PP (3-4%), a fluidity around 1 at 190° - 2,16 kg and a filtration of 1000 microns. It is suitable for moulding flexible articles whose walls are thicken more than 1.5-2 mm, as for example horticultural vases and tubs with handles, tiles and grids.

Code:
003GR017
MFI:
0,8 (2,16 kg - 190°)
Granule:
LDPE
Production:
Injection
Color:
PP

This granule comes from post-consumer, especially from both rigid and flexible food packaging in PP an it is made up of about 85-95% PP and the remaining part of polyethylene, filtered to 1000 microns, with a fluidity between 7 and 9 at 230° - 2,16 kg; it is suitable for the production of injection articles with a good mechanical resistance and with a medium/high moulding speed and whose products’ wall thickness is more than 1.5 mm. These granules can be supplied in various dark tonalities and it is possible to create formulas with mineral charges (CACO3 or talc). This granule can be classified as a PP HOMO-COPO.

Code:
003GR153
MFI:
7 - 9 (2,16 kg - 230°)
Granule:
PP
Production:
Injection
SPF M

This granule comes from post-consumer and it is made up of about 60% PP and 40% PE, filtered to 1000 microns, with a fluidity between 6 and 8 at 230° - 2,16 kg; it is suitable for the production of medium-sized moulded articles or when a fast moulding process is required. These granules can be supplied in various dark tonalities and it is possible to create formulas with mineral charges (CACO3 or TALC).

Code:
003GR190
MFI:
6 - 8 (2,16 kg - 230°)
Granule:
PP/PE
Production:
Injection
SPF M Plus

This granule comes from post-consumer and it is made up of about 60% PP and 40% PE, filtered to 1000 microns, with a fluidity between 12 and 16 at 230° - 2,16 kg; it is suitable for the production of bitumen roll and asphalt road. These granules can be supplied in various dark tonalities and it is possible to create formulas with mineral charges (CACO3 or talc).

Code:
003GR195
MFI:
12 - 16 (2,16 kg - 230°)
Granule:
PP/PE
Production:
Compound